世界で最も先進的なソーラーパネル用EVAフィルム製品のディレクトリへようこそ。ソーラパネルメーカーは、ニーズに完全に適合する太陽電池用封止シートを見つけるために、弊社の先進的なテクニカルフィルターを利用することができます。弊社は全世界のEVAメーカーから詳細情報を収集し、共通のテンプレートにまとめていますので、EVAフィルムの比較が容易に可能となります。
タイプ: | 標準キュア | 引張強度: | -- |
厚さ: | -- | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | 韓国 |
タイプ: | 標準キュア | 引張強度: | -- |
厚さ: | -- | 熱収縮率(長さ/ MD) ≤: | -- |
地域: | 中国 |
√ EVA 9,100: Special design for easy PV modules manufacturing and Superior PID resistance
√ EVA 9,110T/9,120B: Design for high-efficiency solar cell modules with higher PID resistance
√ EVA 9,210T/9,220B:Shortening the time of laminating and improving production efficiency
√ Enhance UV and damp heat stability
√ Higher light transmission to enhance the power output
タイプ: | 高速キュア | 引張強度: | -- |
厚さ: | 0.2 ~ 0.8 mm | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | 中国 |
Ultra-low pre-crosslinking white adhesive film for high barrier packages
Hjt、perc、topcon single glass photovoltaic module
タイプ: | 高速キュア | 引張強度: | 7 MPa |
厚さ: | -- | 熱収縮率(長さ/ MD) ≤: | -- |
地域: | 韓国 |
タイプ: | 超高速キュア | 引張強度: | 16 MPa |
厚さ: | 0.30 ~ 0.80 mm | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | インド |
タイプ: | 高速キュア | 引張強度: | 10 MPa |
厚さ: | 0.2 ~ 0.8 mm | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | 中国 |
Thermoplastic tpo adhesive film
Has the advantages of low packaging temperature and low water vapor transmission rate
Maintains excellent weather resistance and good adhesion
Suitable for perovskite, cigs, lightweight components.
タイプ: | 超高速キュア | 引張強度: | 18 MPa |
厚さ: | 0.50 ~ 0.52 mm | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | 中国 |
タイプ: | 超高速キュア | 引張強度: | 18 MPa |
厚さ: | 0.45 ~ 0.75 mm | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | 中国 |
WHITE EVA II FILM (SV-15,297W)
Excellent durability (including high resistance to temperature, humidity and UV)
Transparent EVA on the cell face and white EVA on the back
Can be used for G-to-G solar modules, normal solar modules and thin-film solar modules
タイプ: | 高速キュア | 引張強度: | 16 MPa |
厚さ: | 0.30 ~ 0.80 mm | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | インド |
タイプ: | 超高速キュア | 引張強度: | 6 MPa |
厚さ: | -- | 熱収縮率(長さ/ MD) ≤: | 3 % |
地域: | 中国 |
PO II FLIM (CO-556)
• Excellent durability (including high resistance for temperature, humidity and UV)
• Excellent adhesion after aging test.
• Easy for processing and quality stable during laminating.
• Low shrinkage rate, to make sure the stable quality during laminating.
• Can be used for G to G solar module, normal solar module and thin film solar module.