蓄電システム技術: | LFP (LiFePO4) |
---|---|
公称容量: | 60 Ah |
地域: | 中国 |
Rechargeable Batteries pack
Battery Type: LiFePO4
Application: Solar Energy Storage Systems
型式 |
|
|
---|---|---|
製品仕様 | ||
蓄電システムカテゴリ | スタンドアローン | |
蓄電システム技術 | LFP (LiFePO4) | |
蓄電池 データシート | ||
電気データ | ||
公称電圧 |
|
|
公称容量 |
|
|
最大放電電流 |
|
|
最大充電電流 |
|
|
温度のパラメータ | ||
充電温度 | -0 ~ +45 ℃ | |
放電温度 | -20 ~ +60 ℃ | |
貯蔵温度 | -0 ~ +40 ℃ | |
一般的なデータ | ||
寸法(長さ*幅*高さ) |
|
|
質量 |
|
Resistance to heavy loads. The battery pack shall be tested according to the regulations and shall not ignite or explode
Resistance to thermal shock The battery pack shall be tested according to the regulations and shall not ignite or explode.
Anti-overcharge. The battery module shall be tested according to the regulations and shall not ignite or explode
Resistance to overdischarge. The battery module shall be tested according to the regulations and shall not ignite or explode
Resistance to short circuit The battery module shall be tested according to the regulations and shall not ignite or explode
High temperature storage. The battery shall be tested according to the regulations and shall not leak smoke, catch fire or explode
Ant-heating.The battery module is tested according to the regulations. No part of the explosion battery penetrates the screen, and some or all of the batteries protrude from the screen.
Anti-puncture. The battery pack shall be tested according to the regulations and shall not ignite or explode.
Anti-extrusion. The battery module shall be tested according to the regulations and shall not ignite or explode
Resistance to low pressure. The battery pack shall be tested in accordance with regulations and shall not leak smoke, catch fire or explode.
11.Constant damp heat, After the battery pack is tested according to the regulations, its appearance shall be free from obvious deformation, rust smoke or explosion, and its capacity shall not be less than 90% of the rated value.
12.Anti-vibration. The battery pack shall be tested according to the regulations, and its appearance shall be free from obvious damage, liquid leakage, smoke or explosion, and it can work normally.
13) Ant-collision. The battery pack shall be tested according to the regulations, and its appearance shall be free from obvious damage, liquid leakage, smoke or explosion, and it can work normally
14) Temperature cycling. The battery pack shall be tested in accordance with the provisions of 6.6.15 which shall not leak, smoke, ignite or explode; the appearance of the battery pack shall be free of cracks, no loss of quality, and the capacity shall not be lower than 70% of the initial state.
15) Flame retardant properties. For battery packs with plastic casing and protective cover, the test shall be carried out in accordance with the provisions of 6.6.16. The outer casing shall comply with the provisions of Article 8.3.2 of the GB/T2408-2008, FH-1 (horizontal level) and 9.3.2 of FV-0 (vertical).Level) requirements.
16) insulation resistance. For a battery pack with a metal case, the insulation resistance of the battery pack's metal and cathode housings is not less than 2 MW.
Turnkey solution for battery manufacturing
Battery factory designing,battery designing and assembly solutions
ODM/OEM finished batteries
Design and solution of lithium battery to replace leadacid battery
Household photovoltaic energy storage system
Industrial and commercial photovoltaic energy storage system
Zero-carbon solutions
Better Technology Group Limited は、グローバルな電池製造統合ソリューション オペレーターであり、現在の事業範囲は世界約 120 の国と地域に及んでいます。
同社は、BETTER と WELLPACK という 2 つの主要ブランドを持ち、主に鉛蓄電池、リチウム電池などの製品に取り組んでいます。
同社は以下の製品とサービスを提供しています。
バッテリー製造のためのターンキー ソリューション。
電池工場の設計、電池製品の設計および工具。
ODM/OEM 完成バッテリー。
鉛蓄電池からリチウム電池への設計とスキーム。
家庭用太陽光発電システム。
産業用および商業用太陽光発電システム。
新しいエネルギーのゼロカーボンソリューション。
Our Services
Turnkey solution for battery manufacturing
Battery factory designing,battery designing and assembly solutions
ODM/OEM finished batteries
Design and solution of lithium battery to replace leadacid battery
Household photovoltaic energy storage system
Industrial and commercial photovoltaic energy storage system
Zero-carbon solutions
Serving the world
Integrated solution operator for global battery manufacturing
Global services: 10+ branches
Production and manufacturing: 3 production bases, production area 50000m²+
R&D technology: 500+ employees, 30%+ R&D technical team
Global Service Network
It has offices in Beijing, Shantou, Guangdong, Nanjing, Jiangsu and other places, and branches in Zambia, Brazil, Dubai, South Africa and other countries.