ソーラーパネルのディレクトリ
(12,374 パネルシリーズ / 46,138 のパネル)

Higher module efficiency and higher output power

Innovative half-cell and PERC technology

Better shade tolerance and reduced internal mismatch loss

High performance under low light conditions

TUV, CQC, and CE Certified

Harsh Environment Adaptability

Passed PID, fire, salt mist corrosion, and ammonia corrosion tests

• Higher Efficiency

• Module efficiency high of 22.3% ensures less BOS cost

• Gain more solar power per square meter

• N-type TOPContechnology ensures a 15-year product warranty and a 30-year

• Less Degradation · 1st-year degradation＜1% ·Annual degradation＜0.4%

• Lower Temperature Coefficient of PMAX

• Tier 1 Brand

• Advanced Technology

• Half-cut Cells

• 21.5% High Efficiency

• Galium-doped M10 Wafer

• Bifacial Power Gain

• 30 Years Power Output Warranty

• Tier 1 European Brand

• Higher Yield Per Surface Area

• Low-Temperature Coefficient

• Higher Yield In Hot Climates

• Certified By Independent Engineering Bodies

• Resistant To Severe Weather Conditions

• 25 Years Limited Product Warranty

• 30 Years Linear Power Output Warranty

• Advanced Half-Cut Technology

• 9 Busbars 166mm Monocrystalline Cells

• Up To 20.3% Efficiency

• 1,500V Allowed System Voltage

• IP 68 Rated Junction Box

Equipped with 144 split cells in a single module - twice more compared to a conventional solar module

Each half-cut cell produces the same amount of voltage as a standard cell but only half of the current

Module reaches power of up to 455W with a maximum efficiency of 20.9%

Designed to withstand harsh environmental conditions - wind loads (2,400 Pa) and snow loads (5,400 Pa)

• 144 half-cut monocrystalline cells

• A conversion efficiency of up to 20.87%

• Equipped with 158.75mm cells, generate up to 420W

• A multi-busbar design with 9 busbars

• Stable power output is ensured by positive power sorting

• A 15 years product warranty and a 30-year linear power warranty

• Bifacial technology enables additional energy harvesting

• 30 years lifespan brings 10-30% additional power generation

• The N-type solar cell has no LID

• Excellent low irradiance performance

• Better light trapping

• Industry-leading lowest thermal co-efficient

• 144 half-cut solar cells

• Advanced half-cut design

• Up to 465 watts output

• Excellent conversion efficiency of up to 20.4%

• 0 to 3% positive power sorting

• Anti-PID technology

• 12-year product warranty

• 25-year linear performance warranty

1.Power range from 660W to 700W

2.High conversion efficiency up to 21.68%

3.PERC technology

4.Anodized aluminium alloy frame

5.3.2-millimeter high-transmission tempered front glass

6.Highly resistant to PID effects12-year product warranty, 25-year linear power output warranty

- EVA encapsulated

- Glass foil sandwich laminated

- Sandblasted anodizing Aluminum frame

- IEC 5,400Pa tested

- Hail up to 25mm diameter, 80 Km/h tested

- Temperature Range: -40 to +85 ℃

- Nominal operating cell temperature (NOCT): 47℃

• Innovational Shingled Technology

• Improved Efficiency

• Up to 35% Better Shade Performance

• Cost-effective, Save 10~13% BOS Cost and 12% Transportation Cost

• 15-Year Product, 25-Year Linear Performance Warranty

• Stock in EU (15~30 MW monthly shipment to Rotterdam warehouse), DDP Service in EU

• The genuine manufacturing expert of TOPCon technology

• 4A1 high rating from Dun & Bradstreet

• The world famous third-party warranty, 12-year material warranty and 25-year power warranty

• Conversion efficiency can reach 21.29%

• High PID resistance

• IP67 protection for greater durability

• TUV, CE, ISO9,001, and SGS certified

• Passed salt, mist, and ammonia resistance tests

• Boasts an IP68 Rating

• Achieves Higher Power Density

• Utilizes SEMI+MBB Technology

• Enhanced Mechanical Load Tolerance

• Developed Under Stringent Conditions

• Exhibits Exceptional Fire-Proof Performance

9 Busbars Solar Cells

Power Output Of Up to 455Wp and 20.3% efficiency

PID Resistant

Excellent Low-light Performance

Severe Weather Resilience

Durability against extreme environmental conditions

Improved Temperature Coefficient

• Rigorous quality control meeting the highest international standards

• High-transmittance low-iron tempered glass, strong aluminum frame using UV-resistant silicon

• ISO 9,001:2,008, ISO 14,001:2,004, OHSAS 18,001

• IEC 61,215, IEC 61,730, safety class II, conformity to CE

• The bifacial solar module is especially suitable for ground-mounted and tracker installations

• More performance through innovative N-Type Topcon technology

• Up to 30% more output through bifacial technology

• Enhanced durability

• Increased energy production during adverse weather conditions

Using high efficiency TOPCON solar cells.

30 years product warranty

glass glass full black

+80% Bifaciality

lower temp. coefficiënt.

more output at lower light conditions compared to PERC.

100% inspection, to guarantee the reliability of solar systems.

Anti LID & Anti PID.

Quality RFID Tracking.

UL certified till 430W