太陽光材料
(504 個々の材料)

• Export the electrical energy generated by the solar module through the cable.

• The built-in diode can prevent the risk of hot spots in the photovoltaic module.

• Provide a secure connection between the solar panels and the rest of the system.

1. Superior Anti-PID performance

2. Low CTM Loss Rate,more suitable for high-power module

3. High bifaciality,relative conversion efficiency ≥92% under low light(200W/m²)

4. High cell conversion efficiency,front efficiency≥25.4%,Bifacial rate≥80%

5. Low decay and Low LID rate

6. Excellent mechanical characteristics

● High Conversion Efficiencies Resulting in Superior Power Output Performance

● Outstanding Power Output Even in Low Light or High Temperature Conditions

● Optimized Design for Ease of Soldering and Lamination

● Long-term Stability, Reliability and Performance

● Low Breakage Rate

● Uniform Color

• High Voltage Capacity: Rated for up to 1500V IEC/UL

• Superior Protection: Achieves IP68 waterproofing and a flame-retardant rating of 5VA

• Wide Temperature Range: Engineered to perform in extreme conditions from -40°C to +85°C

• Flexible Current Options: Offers a variety of current ratings from 18A to 35A

1. Superior Anti-PID performance

2. Low CTM Loss Rate,more suitable for high-power module

3. High bifaciality,relative conversion efficiency ≥92% under low light(200W/m²)

4. High cell conversion efficiency,front efficiency≥25.5%,Bifacial rate≥80%

5. Low decay and Low LID rate

6. Excellent mechanical characteristics

● Positive power tolerance of 0~3% improves system performance

● Industry leading Module efficiency: Max efficiency 22%

● Tested up to 5400 Pa for Maximum load resistance

● Verified resistance against PID effects

● Progressive Power warranty guarantees 80.2% of rated power at 25 Years

● Manufactured globally with world-class quality standards

• Export the electrical energy generated by the solar module through the cable.

• The built-in diode can prevent the risk of hot spots in the photovoltaic module.

• Provide a secure connection between the solar panels and the rest of the system.

1. Superior Anti-PID performance

2. Low CTM Loss Rate,more suitable for high-power module

3. High bifaciality,relative conversion efficiency ≥92% under low light(200W/m²)

4. High cell conversion efficiency,front efficiency≥25.5%,Bifacial rate≥80%

5. Low decay and Low LID rate

6. Excellent mechanical characteristics

• AR-Coated low-iron tempered glass

• Higher light transmittance of more than 93%

• Can tailor-made any smaller size glass according to request

• High-quality, neutral, and elastic single-component adhesive/sealant.

• Demonstrates good adhesion without primer to many substrates.

• Odourless and free of solvents, isocyanates, silicones, and PVC.

• High UV resistance.

• Ultra-fast cure and PID-resistant EVA.

• Designed for use in all photovoltaic devices.

• Short lamination cycle and excellent light transmission.

• Ideal for crystalline silicon modules.

• PERC plus SE Technology

• Higher efficiency to reach a maximum of 23.6%

• Uniform color on the front and back sides

• Smooth coating proportion, easier to solder

• Both lead ribbon and lead-free available

• Higher electrical conductivity and lower power consumption

• Extremely low power loss

• Low fragmentation

• High quality appearance & color uniformity

• Excellent weldability

• PID resistance

• Outstanding power output even in low light

• Stable performance for rooftop or underground solar system

1. High conversion efficiencies resulting in superior power output performance

2. Outstanding power output even in low light or high-temperature conditions

3. Optimized design for ease of soldering and lamination

4. Long-term stability, reliability and performance

5. Low breakage rate

6. Uniform color

• Reliable – Stable supply, lightweight, stronger than 6005-T6, corrosion-resistant, and fully recyclable.

• Traceable – Full supply chain transparency, sourced strategically from Laos.

• Fast – 15 working days for samples to fast-track your testing.

• Customizable – Available upon your drawings.

• Superior Waterproof Seal: Ensures a tight, permanent, and flexible waterproof seal, even in extreme temperatures as low as -57°C (-70°F)

• Versatile Bonding: Adheres to a wide range of surfaces, including EPDM, TPO, aluminium, wood, concrete, and plastics

• Durable and Flexible: Boasting 700% elongation and pliability at -34°C (-30°F)

1. High conversion efficiencies resulting in superior power output performance

2. Outstanding power output even in low light or high temperature conditions

3. Optimized design for ease of soldering and lamination

4. Long-term stability, reliability and performance

5. Low breakage rate

High Efficiency 20%-23%

Wind/Snow Load 2400Pa/5400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature and high humidity areas