地域: |
中国
![]() |
---|
System Introduction
Grace Solar double-pillar bracket is suitable for large-scale ground power plants in various terrains. It adopts open carbon steel cross section as support. With pile driving equipment, the installation speed can be increased by 50% compared with that of screw bolt, and the installation steps of foundation and column are avoided, which greatly saves installation time and makes installation easier. Its rotating head can realize large angle rotation in three directions, It is suitable for installation on various slopes and wavy ground.
Suitable Power Plant Project
It is applicable to all power plant
projects.
Features
· Installation is convenient, compared with ground bolts, the
installation speed can be increased by 50%;
· The head can be flexibly rotated, which can overcome the adverse effects of ground tilt.
Technical Information
Installation site | Ground | Angle | 0-45° |
Construction height | Below 9M | C-shaped steel material | Carbon steel SS400 |
Material | High-strength aluminum alloy &A2-70 | Color | Natural color |
Surface treatment | Aluminum alloy anodizing, carbon steel hot-dip galvanizing | Maximum wind speed | <46m/s (JIS) |
Maximum snow cover | <200cm(JIS) | C-beam penetration depth | 1000mm-2000mmm |
Foundation | Concrete embedded, C-shaped steel foundation | Error range | Up and down 20mm, left and right 2deg, front and rear
2deg |
Reference standards | JIS C 8955:2017 | Quality Assurance | 10-year quality guarantee |
Construction Request
Structure
The longitudinal members and columns are pre-assembled to the greatest extent by the factory, which greatly facilitates on-site construction.
R&D AND PRODUCTION
Case Sharing
Approval and Certificate
グレースソーラー、福島の大規模カーポートに特注品提供 https://jp.gracesolar.com/NewsInfo/13388.html
98MW!グレースソーラーが山口県最大なメガソーラーに架台を提供します https://jp.gracesolar.com/NewsInfo/12382.html
施工しやすいし、様々な種類の施工案件にも対応できる架台です。文句無しに良いブランドです。
-- Mato Conjar, The Green Power Company Pty Ltd.
開発と⾰新
グレースは「技術が第⼀⽣産⼒」を信じ、開発と技術に⼒をどんどん⼊れて来た。2020年年末時点、開発部部員数は50⼈超え、登録構造エンジニア1⼈、博⼠2⼈、院⽣5⼈、学⼠35⼈、内中⾼級職名の持つのは46⼈である。
弊社は製造研究⼀体化の開発と協⼒を重視し、同済⼤学、中南⼤学、厦⾨⼤学等の⼤学と技術交流を⾏っている。「プロ」の技術チームと「⾰新」の開発モードで性能の優れたハイテク製品を製造し続ける。製品の構造安全や性能の⾯においても業界先端に位置づけられている。
⽣産能⼒
⼯場は厦⾨同安区にあり、⾯積は60000m²である。⾃主開発した⽣産ラインは15ラインあり、設備数は50セット以上、⽣産能⼒は年間10GWである。納期通り良質製品を提供でき、且つ素早くお客様のニーズにお答えすることも可能である。
製品
ケーススタディ
証明書を取得する
会社の写真