KPF Cynagard 215A

Amensolar (Suzhou) New Energy Technology Co., Ltd.
レイヤ: PVDF / PET
地域 : 中国 中国
注意:お問い合わせはAmensolar (Suzhou) New Energy Technology Co., Ltd..に直接に送信されます。


(Fluro-skin ® ) one step filming technology. Using Fluorine resin mix with TiO2 and directly coated on PET. Then, you can see a white thin film formed – Fluro skin.It firmly adhere with PET without need to use adhesive chemical. – environmental friendly.


アウター(エア)層 PVDF
アウター(エア)層厚 22.5 µm
ミッドレイヤー 1 PET
ミッドレイヤー 1 厚さ 262 µm
総厚 300.5±30 µm
アウター(エア)層の色 白い,透明な
インナー(セル)レイヤの色 白い,透明な
引っ張り強さ (長さ/MD) 100 Mpa
引っ張り強さ (幅/TD) 100 Mpa
伸長率 (長さ/MD) 140 %
伸長率 (幅/TD) 110 %
層間剥離強度 ≥4 N/cm
剥離強度(EVA-バックシート) ≥40 N/cm
熱収縮率 (長さ/MD) ≤1.5 %
熱収縮率 (幅/TD) ≤1.5 %
水分蒸気透過率(MVTR) ≤2 g/m21日当たり
部分放電電圧 ≥1000 VDC
降伏電圧 ≥16 kV

  lower melting point :Main material is polyethylene,melting point of polyethylene is low(120℃),the melting point of inner non-crosslinking EVA is lower 90℃  

 It is a thermoplastic material,  it  shrink and deform when heat subjected.

It is a heat insulation material 

 The adhesive layer which use for compound is insulation material

 The current conventional E film can not fulfill UV 130KWhr spec ,  it as low as to 90KWhr。

+ strong bonding with EVA:over 80N/cm

+ High UV resistance: 260Kwh irradiation

  Yellowing index △b <3 ,

+ Good UV blocking:  2um thicknes can block 280nm~380nm up to 99.45%(Integrating sphere method)     

UV resistance :   Same to T and  K  :  Better uv resistance and partial discharge

High heat dissipation,  :  35% higher than TPT/TPE :  Better  long term module efficiency

High heat resistance: RTI 120℃   :  Longer Heat aging  

Easy to rework:     EVA No residual film    :   lower manufacturing costs

Amensolar (Suzhou) New Energy Technology Co., Ltd.

No. 209, Zhuyuan Road, High Tech Zone, Suzhou, Jiangsu


Contact Face
Contact Face

Amensolar (Suzhou) New Energy Technology Co., Ltd.からより多く5のシリーズ

  • KPf Cynagard465A(R)
    PVDF / PET / Polyolefin
  • KPK Cynagard 09100
  • 1500V
    PVDF / PET
  • Black KPf Cynagard 225A(B)
    PVDF / PET / Coating
  • MPM Cynagard115E(T)
    Polyolefin / PET / Polyolefin