ソーラーパネルのディレクトリ
(12,401 パネルシリーズ / 46,265 のパネル)

• The bifacial solar module is especially suitable for ground-mounted and tracker installations

• More performance through innovative N-Type Topcon technology

• Up to 30% more output through bifacial technology

• Enhanced durability

• Increased energy production during adverse weather conditions

• Zero LID

• Anti-PID

• Resistant to harsh environments

• Lower temperature coefficient(-0.29%/℃)

• Excellent low irradiance performance

• 80%-85% bifaciality and up to 30% power gain from the back side

• Lower BOS and LCOE

• Advanced half-cut cells

• Bifacial power gains up to 15%

• Micro gap architecture

• Multi-busbars

• Lower internal resistance

• High mechanical load: 5,400 Pa snow, 2,400 wind loads

• 15-year product 30-year linear power output warranty

• Positive Power Tolerance (0~+5W) Guaranteed

• High Module Conversion Efficiency (up to 22.53%)

• Complete System and Product Certifications

• Solid PID Resistance

• Reduced Resistive Loss With Decreased Operating Current

• Increased Energy Yield With Lower Operating Temperature

High Efficiency 20%-23%

Wind/Snow Load 2,400Pa/5,400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature, and high humidity areas

• Achieve outstanding efficiency levels

• Minimize the risk of heat spots

• Experience exceptional performance even in low-light conditions

• Enjoy a power tolerance of 0-3%

• Benefit from PID resistance

• Withstand extreme weather conditions

• Generate electricity on both sides for maximum efficiency

• 144 high-quality monocrystalline cells

• A conversion efficiency rating of up to 22.45%

• A total power output range of 570-to-580-watt peak

• Up to 5W positive power output tolerance

• An anodized aluminium alloy and a 3.2mm thick glass

• A 15-year product and 30-year performance warranty

• Lower LCOE, reduced BOS cost, shorter payback time

• Half-cut cells and multi busbars

• Excellent anti-PID performance

• Robust design

• IP68 junction box

• 5,400Pa snow, 2,400Pa wind loads

• 12-year product warranty and 25-year linear power warranty

• TUV certified

• Stable power output with positive+5% tolerance

• Can withstand snow loads of up to 5,400Pa and wind loads of up to 2,400 Pa

• Cutting-edge half-cut PERC cells

• Incorporates 10 busbars for enhanced performance

• Achieves additional power gain from the bifacial design

• Features non-destructive cutting technology

• Lightweight design for simplified installation

• Equipped with an IP68-protected junction box

Power range from 555W to 575W

High conversion efficiency up to 21.68%

PERC technology

Anodized aluminium alloy frame3.2-millimeter high-transmission tempered front glassHighly resistant to PID

effects12-year product warranty, 25-year linear power output warranty

• Bloomberg Tier 1 Brand

• N-Type TOPCon Technology

• Bifacial Power Gain

• Up To 22.57% Module Efficiency

• LID And PID Resistant

• High-Quality Materials, Best Workmanship, German Engineering

• 30-year Linear Performance, 15-year Product Warranty

- EVA encapsulated

- Glass foil sandwich laminated

- Sandblasted anodizing Aluminum frame

- IEC 5,400Pa tested

- Hail up to 25mm diameter, 80 Km/h tested

- Temperature Range: -40 to +85 ℃

- Nominal operating cell temperature (NOCT): 47℃

• Bifacial technology enables additional energy harvesting

• 30 years lifespan brings 10-30% additional power generation

• The N-type solar cell has no LID

• Excellent low irradiance performance

• Better light trapping

• Industry-leading lowest thermal co-efficient

High power, high efficiency, positive power tolerance

German technology

Most cost-effective products, lower project cost 

Sincerely looking for distributors all over the world

• Rigorous quality control meeting the highest international standards

• High-transmittance low-iron tempered glass, strong aluminium frame using UV-resistant silicon

• ISO 9,001:2,008, ISO 14,001:2,004, OHSAS 18,001

• IEC 61,215, IEC 61,730, safety class II, conformity to CE